Home

Emergency Plumbers in Birmingham play a vital role in most homes as they come in handy whenever the plumbing system breaks down. The plumbing system in Birmingham is the pipes put together in a building to supply clean water for drinking and cleaning, in addition to proper disposal of dirty water.

Heating Plumbing Services

Emergency Plumbing companies in Birmingham have certified and licensed plumbing personnel who can offer either commercial or residential services. Here are a wide range of services offered by a Birmingham plumber:

How to Start a Plumbing Business

Birmingham Emergency Plumbing Installation – Qualified plumbing personnel can install new water heating systems and can also replace faulty ones. Being experts, they also analyse and evaluate the needs of the client. They then advice on whether to repair or replace plumbing in Birmingham, or install a tank or go tankless. The good training they acquired gives them the knowledge and skill to carry out water heater jobs of all kinds, whether repairing or installing in a commercial building or a small home in Birmingham. The water heater systems they can install include, under the sink water heaters, the tankless high efficiency water heaters among others.

Drain Unblocking

Types of Plumber Services

The Roman's used lead and clay piping for potable water that serviced private homes, amphitheaters, and bathhouses throughout the Roman Empire. In fact lead was still the predominant metal used for water services servicing homes and businesses in the US up until WW II. Lead was very flexible and extremely durable which made it an ideal piping material. In fact "lead wiping" was considered an art form. The use of lead for potable water declined sharply after WW II because of the dangers of lead poisoning. There is still some controversy with regards to the harmfulness of lead water services being used. Some testing was done several years ago and it was found that the service calcified so quickly very little if any lead leeched through the calcification be that as it may lead services are no longer used and are still being replaced to this day in some of our larger older cities across the US.

Just after WWII copper became the material of choice for water services around the country and galvanized screw piping became the material of choice for interior plumbing piping. In the 70's, copper replaced galvanized piping for water piping supremacy. Copper is fairly easy to work with, comes in soft (annealed) and hard copper. There are several different grades of copper water, waste and vent piping; DWV copper tubing is the thinnest walled copper tubing and is only recommended in drainage waste and vent applications. Type "M" is the thinnest walled copper to be used for plumbing water piping. It is approved for water piping in most municipalities but it's more popular use is for drain, waste and vent (DWV) piping.

Ductile iron replaced sand cast in the early 1960s. Ductile iron is a cast iron, but the way it's heated and enhanced by chemical compounds greatly improved its strength and improved on cast iron's tendency to be strong but very brittle.

With regards to waste and vent piping, cast iron and PVC are the materials used most especially for large diameter piping. Copper is also used for waste and vent but in smaller diameter applications. Because of copper's value it becomes cost prohibitive to use it with larger diameter pipe for reference, say 3" and above.

There is one other area that we think needs to be touched upon and its acid waste piping. Acid waste, by definition, is any waste in which acids appear in higher concentrations than found in household waste. Although PVC has acid resistant properties, it is not recommended for use in situations where piping is continually exposed to higher than normal concentrations i.e. photo labs, science labs, chemical companies etc. In these situations acid resistant pipe and fitting are recommended.

Corgi Registered Plumbers

CPVC Pipe Installation Tips From a Professional Plumber

When working as a plumber some of the work that you might do includes installing and repairing various plumbing systems such as waste and water.

Leak detection

One of the main reasons that a plumber may be called by a homeowner for leak detection is that their water bill has suddenly went up due to a high reading. Searching for the leak could take a few hours and may include having to cut holes in the walls to check out the pipe fittings and pipes. If possible, call the plumber during their operating hours because it is more expensive to call after hours, which is considered an emergency call.

Unclogging pipes

Many things can clog sinks, like hair, food, grease, etc and may require a plumber's service if you cannot unclog it yourself. When a plumber comes to your home, they have special tools they can use like plumber's snakes and rooter machines. The rooter machine has rotating blades that are hooked to cables and spin to clear the clog. A plumber's snake reaches into the pipes to clear the clogs. Some plumber's snakes have a small camera attached so they can see inside the pipes and they also come in various lengths. If it is a very tough clog the plumber may use hydro-jetting. This involves used high-pressured water to unclog and clean the pipes. It can also be used on septic systems and sewer lines.

Rerouting pipes

When you have old leaky pipes or doing home remodeling, a professional plumber may be called to re-pipe or reroute the pipes. This involves changing the configurations of the pipes so they mesh with the new design of the new kitchen or kitchen. It is also done to close off damaged or leaky pipes.

Plumbers also do preventative inspections of the plumbing system to help prevent any future problems from occurring, usually when a home is sold or being bought. They visually review the fixtures and pipes, test the flow of drains, and check faucets for leaks.